Walk In Chamber, Walk In Humidity Chamber, Walk In Humidity Chambers, Plant Growth Chambers, Thane, India
Home | About Us | Products | Features | Support | Achievements | Clients | Contact Us | Feedback | Sitemap
 
 
 

Walk-In-Humidity Chamber

     
Technical Specification:
Temperature Range: 20°C - 60 °C
Humidity Range: 40%RH - 95%RH
Accuracy: +0.2 °C / +2.0 % RH
Uniformity: +1.0 °C / +3.0 % RH
Test suitable for: 25°C & 60%RH, 30°C & 65%RH,
  40°C & 75%RH, 30°C & 75%RH

Specially designed chambers for Low Humidity conditions, 
such as 25°C & 40%RH, 40°C & 25%RH, 30°C & 35%RH.

Optional Features
GSM TECHNOLOGY
HOOTER SYSTEM
EXTRA TRAY

Walk In Humidity Chamber


 
 
 
Stand by Refrigeration system Control System Rack
Stand by Refrigeration system Control System Rack
 
Introduction :
Stability Chambers are used in performing “Stability Studies”. Stability studies provide an evidence on the changes in the quality of product with Time, under the influence of varied environmental factors: Temperature, Humidity.

Evaluation of product (API or Formulations) under recommended storage conditions, ( with appropriate tolerances) that test its “Thermal Stability” & if applicable, its sensitivity to moisture.

In simple words, Stability can be expressed as: “The capacity of a drug to remain within specifications established, to assure its Integrity, Strength, Quality & Purity”
 
Features:
Construction
Inner Working Chamber is fabricated of “Stainless Steel” (matt finish) & Exterior is of G.I. Powder coated OR stainless steel: sSS304 or SS3016 according to the needs of client or user.
The inner working chamber is water & vapour tight high-grade stainless steel. All seams are arc-welded & passivated for strength& durability.

Full View Glass Door
Single Door with a “Viewing Window” (of Toughened Glass) for easy inspection & viewing the samples without disturbing the set environmental conditions of the chamber (by opening the door).

Illumination
Inner working chamber is provided with a fluorescent tube for illuminating the chamber to view & inspect samples visually

Leveling Legs
“Bullet feet” ensures easy mobility during installation & cleaning. Bullet feet are specially designed for longer life under heavy load with built in screwing adjustment “for accurate horizontal levelling of the chamber).

Trays
Heavy duty solid stainless steel duly electro polished perforated trays are provided, which are easy to clean, saves time & efforts while cleaning, & also height adjustable for convenience with the help of channels.(Height Adjustable every Half an inch)

21 CFR PART-11 Compliance
Log data, Event data, Audit Trail data, E-Records & E-signatures, Graphical analysis & Data acquisition.
 
SIZES :
Models
MK*-WH600
MK*-WH800
MK*-WH1000
MK*-WH1200
MK*-WH1600
MK*-WH1800
Features
6000 Ltrs
8000 Ltrs
10000 Ltrs
12000 Ltrs
16000 Ltrs
18000 Ltrs
Interior Dimension            
Width in mm
2000
2000
2000
2000
2000
4000
Depth in mm
1500
2000
2500
3000
4000
3000
Height in mm
2000
2000
2000
2000
2000
2000
Exterior Dimension            
Width in mm
2160
2160
2160
2160
2160
4160
Depth in mm
2010
2510
3010
3510
4510
3510
Height in mm
2190
2190
2190
2190
2190
2190
Racks and Trays            
No of Racks
4
4
6
6
8
10
No of Trays
20
20
30
30
40
50
Trays Size in mm
600 X 600 X 30
600 X 900 X 30
700 X 600 X 30
900 X 600 X 30
900 X 600 X 30
900 X 600 X 30
Type
Wiremesh Type
Power Supply            
Power Supply
Three Phase, 440V 50Hz
Power Rating
7KW
8KW
8KW
8KW
9KW
15KW
Warranty 12 Months
 
NOTE:
MK* :- MK1 / MK2 / Mk3
WALK-IN BOD INCUBATOR & WALK-IN COLD CHAMBER are also available on requirement.
 
Home | About Us | Products | Features | Support | Achievements | Clients | Contact Us | Feedback | Sitemap | Walk In Chamber
Bacteriological Incubator | Deep Freezer | Hot Air Oven | Humidity Chamber | BOD Incubator | Photostability Chamber | Cold Chamber

Best View " 1024 x 768 Pixels

| Designed By MIPL | Hosted By MID | Promoted By GID |